单晶硅反射镜激光能量吸收系数与衬底表面质量的关联

高能激光系统中,单晶硅基底反射镜的能量吸收系数是影响系统性能的关键指标。衬底加工质量对镀膜后元件激光能量吸收系数影响显著。通过测试不同衬底粗糙度、划痕密度的单晶硅反射元件,分析衬底表面典型加工特征(粗糙度、划痕)对激光能量吸收系数的影响规律,认为粗糙度与吸收系数正相关,粗糙度均方根从0.668nm降低至0.345nm会使吸收系数降低28.0%。少量划痕对吸收系数的直接影响并不明显,吸收系数均值变化在3.1%以内。但表面划痕会诱发激光损伤,划痕密度较大时会引起后续能量吸收持续增大,辐照400s后,吸收系数较辐照100s时增大18.3%。     

高分辨率UAV SAR的三维运动误差分离与补偿

在基于SAR回波的数据处理中,多普勒调频率具有很高的估计精度且对场景的依赖性很小,可以更广泛地用于自聚焦处理。基于多普勒调频率参数估计,针对回波包络及相位分别提出了误差提取模型,并通过包络误差校正和相位误差补偿两个步骤实现了高精度的运动补偿处理。实测数据表明,本文方法可以在低精度导航信息情况下获取高分辨率雷达图像。     

基于满足率的随舰备件配置方案

针对满足率只有统计定义的问题,从不同角度研究了备件满足率的概率性质,给出了满足率的两种概率模型,揭示了满足率的内涵和实际工程意义。在此基础上,给出了系统备件保障满足率的概率定义,建立了以系统备件满足率为约束、备件总重量最小为目标的随舰备件配置优化模型,研究了优化模型的边际效益算法。实例分析表明：该方法为合理制定舰艇随舰备件保障方案提供了决策依据。     

Choosing arrival process models for service systems: Tests of a nonhomogeneous Poisson process

Service systems such as call centers and hospital emergency rooms typically have strongly time‐varying arrival rates. Thus, a nonhomogeneous Poisson process (NHPP) is a natural model for the arrival process in a queueing model for performance analysis. Nevertheless, it is important to perform statistical tests with service system data to confirm that an NHPP is actually appropriate, as emphasized by Brown et al. [8]. They suggested a specific statistical test based on the Kolmogorov–Smirnov (KS) statistic after exploiting the conditional‐uniform (CU) property to transform the NHPP into a sequence of i.i.d. random variables uniformly distributed on [0,1] and then performing a logarithmic transformation of the data. We investigate why it is important to perform the final data transformation and consider what form it should take. We conduct extensive simulation experiments to study the power of these alternative statistical tests. We conclude that the general approach of Brown et al. [8] is excellent, but that an alternative data transformation proposed by Lewis [22], drawing upon Durbin [10], produces a test of an NHPP test with consistently greater power. We also conclude that the KS test after the CU transformation, without any additional data transformation, tends to be best to test against alternative hypotheses that primarily differ from an NHPP only through stochastic and time dependence. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 66–90, 2014     

Some aging properties of parallel and series systems with a random number of components

In this article, we study aging properties of parallel and series systems with a random number of components. We show that the decreasing likelihood ratio property is closed under the formation of random minima. We also show, by counterexamples, that other aging properties are not closed under the formation of random minima or maxima. Some mistakes in the literature are corrected. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 238–243, 2014     

Some comparisons of residual life of coherent systems with exchangeable components

Most of the research, on the study of the reliability properties of technical systems, assume that the components of the system operate independently. However, in real life situation, it is more reasonable to assume that there is dependency among the components of the system. In this article, we give sufficient conditions based on the signature and the joint distribution of component lifetimes to obtain stochastic ordering results for coherent and mixed systems with exchangeable components. Some stochastic orders on dynamic (or conditional) signature of coherent systems are also provided. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 549–556, 2014     

基于星架系统结构参数的卫星载荷减振方法

卫星工程中广泛采用的有效载荷支架结构可能会与卫星主体结构发生动力耦合,进而造成有效载荷响应显著放大。进一步将有效载荷支架与卫星主体结构考虑为一个整体系统(称为星架系统)。采用有限元方法建立某型卫星系统级动力学分析模型,从中提取结构参数建立集中参数模型,并针对结构参数进行单变量影响分析。结果表明:所建集中参数模型能够反映支架结构与卫星主体结构之间动力耦合规律,载荷响应对两者频率参数的敏感程度远高于其阻尼和质量参数,卫星结构设计阶段应重点考量主体结构和支架结构频率关系以优化卫星载荷的动力学环境。     

Warranty costs: An age‐dependent failure/repair model

An age‐dependent repair model is proposed. The notion of the “calendar age” of the product and the degree of repair are used to define the virtual age of the product. The virtual failure rate function and the virtual hazard function related to the lifetime of the product are discussed. Under a nonhomogeneous Poisson process scenario the expected warranty costs for repairable products associated with linear pro‐rata, nonrenewing free replacement and renewing free replacement warranties are evaluated. Illustration of the results is given by numerical and graphical examples. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Optimal pricing for a short life‐cycle product when customer price‐sensitivity varies over time

Technology products often experience a life‐cycle demand pattern that resembles a diffusion process, with weak demand in the beginning and the end of the life cycle and high demand intensity in between. The customer price‐sensitivity also changes over the life cycle of the product. We study the prespecified pricing decision for a product that exhibits such demand characteristics. In particular, we determine the optimal set of discrete prices and the times to switch from one price to another, when a limited number of price changes are allowed. Our study shows that the optimal prices and switching times show interesting patterns that depend on the product's demand pattern and the change in the customers' price sensitivity over the life cycle of the product. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012